SubliJet™ Information
Transfer Instructions:
- Place transfer sample on substrate with printed side facing down.
(Ceramic, metal, and glass substrates must be specially coated for sublimation.)
- Press at medium to high pressure according to time and temperature
shown below.
- Quickly peel transfer paper from substrate
SubliJet™ Time and Temperature Chart
| Surface |
Time |
Temperature |
| Polyester Fabric |
20 sec |
400° F |
| Mugs |
180 sec |
400° F |
| Mouse Pads |
25 sec |
400° F |
| Metal |
40 sec |
400° F |
| Dry Erase Boards |
60 sec |
400° F |
| Glass |
180 sec |
400° F |
SubliJet™ XL Time and Temperature Chart
| Surface |
Time |
Temperature |
Pressure | Remarks |
| Polyester |
35-45 sec |
400° F |
Med./40 PSI |
Best for permanency and washability |
| Mouse Pads |
35 sec |
400° F |
Med./40 PSI |
|
| Ceramic |
150-200 sec |
300°-400° F |
Med./40 PSI |
Time varies with press |
| Metal |
60 sec |
375° F |
Med./40 PSI |
Use absorbent backing behind transfer paper |
| FR Plastic |
45 sec |
400° F |
Med./40 PSI |
|
| Hanes Digital L'ink T-shirt |
35 sec |
400° F |
Med./40 PSI |
Preheat (press the shirt for 5 seconds to eliminate moisture.
Use a Teflon sheet between sides of the shirt to prevent "blow
through". |
| Unisub |
75 sec |
400° F |
Med./40 PSI |
|
|
